MMS nix geht

Re: MMS nix geht

Beitragvon naicheben » 30.03.2011 20:29

Deine WeatherConfig Version ist 4 nicht 5. Du hast kein Update gemacht!

EDIT: zeig mal Deine /tmp/mms.log
Benutzeravatar
naicheben
Professional
 
Beiträge: 3519
Registriert: 07.09.2005 15:28
Wohnort: Leck Nordfriesland

Re: MMS nix geht

Beitragvon daice » 30.03.2011 21:21

bei mir kommt da folgendes:

Code: Alles auswählen
My Media System: 1.1.0 rc9
Configuration: --prefix=/usr --enable-lirc --enable-evdev --enable-notify-area --enable-res-switch --enable-gst-audio --enable-alsaplayer --enable-opengl --enable-dxr3 --enable-dvb --enable-mpeg --enable-lcd --enable-game --enable-tv --enable-weather --enable-python --enable-clock --enable-vbox --enable-debug --disable-optimization --use-internal-ffmpeg


meine MMS Version ist irgend wie älter, kann ich die updaten wenn ja wie?

daice
Zenega 101s CI mit deb10ega - 120GB HDD - 256MB RAM - WLAN - Budget DVB-S-Karte - GLCD2USB Display
Zenega 101s CI mit deb10ega - 120GB HDD - 256MB RAM - WLAN - Budget DVB-S-Karte - internes DVD-ROM - GLCD2USB Display
Zenega 101s CI mit deb10ega - 120GB HDD - 128MB RAM - WLAN - FullFeatured DVB-S-Karte
S100 mit deb10ega - 16GB CF - 128MB RAM - WLAN - FullFeatured DVB-S-Karte
daice
Advanced Member
 
Beiträge: 51
Registriert: 03.03.2011 19:45

Re: MMS nix geht

Beitragvon naicheben » 30.03.2011 21:45

Das haben wir oben doch besprochen
naicheben hat geschrieben:Ah, sorry, mein Fehler. Etch ist nicht mehr supportet und daher nur noch unter archive zu finden.
Logge Dich mal in die Box ein und editier die /etc/apt/sources.list:
Code: Alles auswählen
#
# INSTALL / UPDATE DEBIAN PACKAGES
#
deb http://archive.debian.org/debian/ etch main non-free contrib
#deb-src http://ftp.de.debian.org/debian/ etch main non-free contrib

#deb http://security.debian.org/ etch/updates main contrib non-free
#deb-src http://security.debian.org/ etch/updates main contrib non-free

Jede Zeile mit einer Raute # davor wird ignoriert. Du musst also die Debianquellen für den Paketmanager so einrichten, dass die nicht mehr gültigen URLs (da wo Du 404 zurück bekommst) auskommentiert sind. Oder gelöscht.

Dann speichern und beenden und anschließend

Code: Alles auswählen
apt-get update && apt-get upgrade
machen. Dann machst Du die Schritte aus dem Wiki und dann lesen wir uns, weil MMS nicht mehr startet, aber das bekommen wir dann zusammen wieder hin. :lol:
Beim einspielen der Updates, wird apt Dich fragen, ob Du die Pakete von MMS trotzdem runterladen willst, sage da Ja. Dann fragt er, ob Du die Konfigurationsdateien vom Paketersteller oder die alten behalten willst, nimm die vom Paketersteller. Es werden Backups Deiner Konfigurationsdateien in /etc/mms angelegt, da kann man dann die Debvision-spezifischen Sachen wieder abschreiben.


daice hat geschrieben:So hab alles soweit gemacht und was soll ich sagen es geht, auch MMS startet...
Im MMS der Punkt TV ist für eine zusätzliche TV-Karte oder irre ich da?

Jetzt muss ich warten bis meine MiniPCI WLAN Karte da ist und mir noch ne PCI TV Karte besorgen, dann is alles perfekt.
Danke erstmal für die Hilfe aber ich treff bestimmt noch auf Probleme...

Gruss daice
Benutzeravatar
naicheben
Professional
 
Beiträge: 3519
Registriert: 07.09.2005 15:28
Wohnort: Leck Nordfriesland

Re: MMS nix geht

Beitragvon naicheben » 30.03.2011 21:47

Vielleicht hätte ich das besser erklären sollen. Insgeamt sollte die /etc/apt/sources.list so aussehen:
Code: Alles auswählen
etchbox:~# cat /etc/apt/sources.list
#
# INSTALL / UPDATE DEBIAN PACKAGES
#
deb http://archive.debian.org/debian/ etch main non-free contrib
#deb-src http://ftp.de.debian.org/debian/ etch main non-free contrib

#deb http://security.debian.org/ etch/updates main contrib non-free
#deb-src http://security.debian.org/ etch/updates main contrib non-free

#
# INSTALL / UPDATE MULTIMEDIA PACKAGES
#
#deb http://www.debian-multimedia.org etch main
#
#deb http://mailwurm.org etch mplayer

#
# INSTALL / UPDATE VDR PACKAGES
#
deb http://e-tobi.net/vdr-experimental etch base addons vdr-multipatch

#
# INSTALL / UPDATE MMS PACKAGES
#
deb http://www.prodeia.de/mms/etch binary/
Benutzeravatar
naicheben
Professional
 
Beiträge: 3519
Registriert: 07.09.2005 15:28
Wohnort: Leck Nordfriesland

Re: MMS nix geht

Beitragvon daice » 30.03.2011 22:05

OK Fehler gefunden, die letzte Zeile in der sources.list war auskomentiert.
Jetzt hat es MMS neu installiert und siehe da das Wetter geht plötzlich. DANKE!

Aber mein Problem mit parallelem Betrieb von PCI und Mini-PCI bleibt wohl...oder?

Gruss daice
Zenega 101s CI mit deb10ega - 120GB HDD - 256MB RAM - WLAN - Budget DVB-S-Karte - GLCD2USB Display
Zenega 101s CI mit deb10ega - 120GB HDD - 256MB RAM - WLAN - Budget DVB-S-Karte - internes DVD-ROM - GLCD2USB Display
Zenega 101s CI mit deb10ega - 120GB HDD - 128MB RAM - WLAN - FullFeatured DVB-S-Karte
S100 mit deb10ega - 16GB CF - 128MB RAM - WLAN - FullFeatured DVB-S-Karte
daice
Advanced Member
 
Beiträge: 51
Registriert: 03.03.2011 19:45

Re: MMS nix geht

Beitragvon naicheben » 30.03.2011 22:22

Das mit dem PCI/miniPCI habe ich nicht, weil ich eine FlexRiser der F. Travla habe (www.reichelt.de ~20.- ), die verteilt die IRQs anders und habe damit fast alle Kombinationen mit der XG-60x und einer PCI-Karte hinbekommen. Aber eben nur fast.
Garantieren kann ich das für Deine Kombination aber nicht, darum habe ich auch nicht auf Deinen anderen Thread geantwortet.
Benutzeravatar
naicheben
Professional
 
Beiträge: 3519
Registriert: 07.09.2005 15:28
Wohnort: Leck Nordfriesland

Re: MMS nix geht

Beitragvon daice » 30.03.2011 22:42

Zenega 101s CI mit deb10ega - 120GB HDD - 256MB RAM - WLAN - Budget DVB-S-Karte - GLCD2USB Display
Zenega 101s CI mit deb10ega - 120GB HDD - 256MB RAM - WLAN - Budget DVB-S-Karte - internes DVD-ROM - GLCD2USB Display
Zenega 101s CI mit deb10ega - 120GB HDD - 128MB RAM - WLAN - FullFeatured DVB-S-Karte
S100 mit deb10ega - 16GB CF - 128MB RAM - WLAN - FullFeatured DVB-S-Karte
daice
Advanced Member
 
Beiträge: 51
Registriert: 03.03.2011 19:45

Re: MMS nix geht

Beitragvon naicheben » 30.03.2011 22:53

ja, das ist sie. Die hat einen Jumper, damit muss man dann spielen,also Karte in die Riser und dann:
1) reinstecken
2) booten
3) lspci und dmesg auswerten...
4) runterfahren
5) umjumpern
und wieder bei 1) weitermachen, bis es geht... Kostet etwas zeit, aber dann weiß man was geht.
Benutzeravatar
naicheben
Professional
 
Beiträge: 3519
Registriert: 07.09.2005 15:28
Wohnort: Leck Nordfriesland

Re: MMS nix geht

Beitragvon daice » 14.04.2011 18:10

So hab jetzt die RISER bekommen und es geht schon mal mehr als vorher...
lspci gibt folgendes aus:
Code: Alles auswählen
00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 04)
00:02.0 VGA compatible controller: Intel Corporation 82830 CGC [Chipset Graphics Controller] (rev 04)
00:02.1 Display controller: Intel Corporation 82830 CGC [Chipset Graphics Controller]
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 82)
00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02)
01:02.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
01:02.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
01:07.0 Network controller: Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04)


und dmsg bringt folgendes:

Code: Alles auswählen
* this bug, please use "acpi_pm_good" to disable the workaround
PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  46, should be 43 [20070126]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: RTC can wake from S4
Time: tsc clocksource has been installed.
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x400-0x47f has been reserved
system 00:07: ioport range 0x500-0x53f has been reserved
system 00:09: iomem range 0xffc00000-0xfff7ffff has been reserved
system 00:0a: iomem range 0x0-0x0 could not be reserved
system 00:0a: iomem range 0x0-0x0 could not be reserved
system 00:0d: ioport range 0xa00-0xa3f has been reserved
system 00:0e: iomem range 0x0-0x9ffff could not be reserved
system 00:0e: iomem range 0xc0000-0xdffff could not be reserved
system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
system 00:0e: iomem range 0x100000-0x3efffff could not be reserved
system 00:0e: iomem range 0x0-0x0 could not be reserved
PCI: Bridge: 0000:00:1e.0
  IO window: d000-dfff
  MEM window: ff700000-ff7fffff
  PREFETCH window: dea00000-deafffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
it is
Freeing initrd memory: 4758k freed
audit: initializing netlink socket (disabled)
audit(1302796609.612:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 248k freed
ACPI: Processor [CPU1] (supports 8 throttling states)
input: AT Translated Set 2 keyboard as /class/input/input0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 7, io base 0x0000e000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 5, io base 0x0000e080
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 9, io base 0x0000e400
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 10, io mem 0xffa7f400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller (0x8086:0x24cb rev 0x02) at  PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
hda: SAMSUNG SP1203N, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: host side 80-wire cable detection failed, limiting max speed to UDMA33
hda: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
8139cp 0000:01:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp 0000:01:06.0: Try the "8139too" driver instead.
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
eth0: RealTek RTL8139 at 0xd800, 00:02:ff:00:23:79, IRQ 11
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
SCSI subsystem initialized
libata version 3.00 loaded.
hda: max request size: 512KiB
hda: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=16383/255/63
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
Attempting manual resume
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Linux agpgart interface v0.102
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Real Time Clock Driver v1.12ac
input: PC Speaker as /class/input/input1
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
agpgart: Detected an Intel 830M Chipset.
agpgart: Detected 380K stolen memory.
agpgart: AGP aperture is 128M @ 0xf0000000
intel_rng: FWH not detected
ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
input: PS/2 Generic Mouse as /class/input/input4
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 52518 usecs
intel8x0: clocking to 48000
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]>
Linux video capture interface: v2.00
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
ipw2100: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:01:02.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
bttv0: Bt878 (rev 17) at 0000:01:02.0, irq: 9, latency: 64, mmio: 0xdeafe000
bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is 1822:0001
bttv0: using: Twinhan DST + clones [card=113,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00f500ff [init]
bttv0: tuner absent
bttv0: add subdevice "dvb0"
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:01:02.1[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
bt878_probe: card id=[0x11822],[ Twinhan VisionPlus DVB ] has DVB functions.
bt878(0): Bt878 (rev 17) at 01:02.1, irq: 9, latency: 64, memory: 0xdeaff000
DVB: registering new adapter (bttv0)
irq 7: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper Not tainted 2.6.24-etchnhalf.1-686 #1
[<c0156d8a>] __report_bad_irq+0x36/0x75
[<c0156fa4>] note_interrupt+0x1db/0x217
[<c4855b28>] usb_hcd_irq+0x21/0x4e [usbcore]
[<c01564ab>] handle_IRQ_event+0x23/0x51
[<c01578c3>] handle_level_irq+0x88/0xb9
[<c0106701>] do_IRQ+0x55/0x70
[<c0115e7e>] smp_apic_timer_interrupt+0x71/0x7d
[<c01048cb>] common_interrupt+0x23/0x28
[<c013007b>] kernel_restart_prepare+0x17/0x25
[<c015649f>] handle_IRQ_event+0x17/0x51
[<c01578af>] handle_level_irq+0x74/0xb9
[<c0106701>] do_IRQ+0x55/0x70
[<c0102cfb>] default_idle+0x0/0x55
[<c01048cb>] common_interrupt+0x23/0x28
[<c0102cfb>] default_idle+0x0/0x55
[<c011007b>] cyrix_get_free_region+0x27/0xd4
[<c011abe8>] native_safe_halt+0x2/0x3
[<c0102d34>] default_idle+0x39/0x55
[<c01025f8>] cpu_idle+0xab/0xcc
[<c0379947>] start_kernel+0x338/0x340
[<c03790e0>] unknown_bootoption+0x0/0x195
=======================
handlers:
[<c4855b07>] (usb_hcd_irq+0x0/0x4e [usbcore])
Disabling IRQ #7
dst(0) dst_probe: unknown device.
frontend_init: Could not find a Twinhan DST.
dvb-bt8xx: A frontend driver was not found for device 109e/0878 subsystem 1822/0001
Adding 417680k swap on /dev/hda2.  Priority:-1 extents:1 across:417680k
EXT3 FS on hda3, internal journal
loop: module loaded
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [email protected]
fuse init (API version 7.9)
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ieee80211_crypt: registered algorithm 'WEP'
eth0: link down
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
eth1: no IPv6 routers present


Warum wird die Karte jetzt nicht richtig erkannt?

Gruss daice
Zenega 101s CI mit deb10ega - 120GB HDD - 256MB RAM - WLAN - Budget DVB-S-Karte - GLCD2USB Display
Zenega 101s CI mit deb10ega - 120GB HDD - 256MB RAM - WLAN - Budget DVB-S-Karte - internes DVD-ROM - GLCD2USB Display
Zenega 101s CI mit deb10ega - 120GB HDD - 128MB RAM - WLAN - FullFeatured DVB-S-Karte
S100 mit deb10ega - 16GB CF - 128MB RAM - WLAN - FullFeatured DVB-S-Karte
daice
Advanced Member
 
Beiträge: 51
Registriert: 03.03.2011 19:45

Re: MMS nix geht

Beitragvon naicheben » 14.04.2011 21:11

naicheben hat geschrieben:ja, das ist sie. Die hat einen Jumper, damit muss man dann spielen,also Karte in die Riser und dann:
1) reinstecken
2) booten
3) lspci und dmesg auswerten...
4) runterfahren
5) umjumpern
und wieder bei 1) weitermachen, bis es geht... Kostet etwas zeit, aber dann weiß man was geht.
Benutzeravatar
naicheben
Professional
 
Beiträge: 3519
Registriert: 07.09.2005 15:28
Wohnort: Leck Nordfriesland

Re: MMS nix geht

Beitragvon naicheben » 14.04.2011 21:12

Ich habe den Jumper auf 24 stehen!
Benutzeravatar
naicheben
Professional
 
Beiträge: 3519
Registriert: 07.09.2005 15:28
Wohnort: Leck Nordfriesland

Re: MMS nix geht

Beitragvon daice » 14.04.2011 21:27

was muss den da stehen wenns geht?
Zenega 101s CI mit deb10ega - 120GB HDD - 256MB RAM - WLAN - Budget DVB-S-Karte - GLCD2USB Display
Zenega 101s CI mit deb10ega - 120GB HDD - 256MB RAM - WLAN - Budget DVB-S-Karte - internes DVD-ROM - GLCD2USB Display
Zenega 101s CI mit deb10ega - 120GB HDD - 128MB RAM - WLAN - FullFeatured DVB-S-Karte
S100 mit deb10ega - 16GB CF - 128MB RAM - WLAN - FullFeatured DVB-S-Karte
daice
Advanced Member
 
Beiträge: 51
Registriert: 03.03.2011 19:45

Re: MMS nix geht

Beitragvon naicheben » 14.04.2011 22:30

Naja, erkennen tut es da ja schon eine Karte:
Code: Alles auswählen
01:02.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
01:02.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)

Hast Du denn was unter
/dev/dvb
Code: Alles auswählen
ls /dev/dvb/
muss mindestend frontend0 rausspucken, dann läuft die Karte.
Benutzeravatar
naicheben
Professional
 
Beiträge: 3519
Registriert: 07.09.2005 15:28
Wohnort: Leck Nordfriesland

Re: MMS nix geht

Beitragvon naicheben » 14.04.2011 22:31

Achja, und Deine Ausgabe von
Code: Alles auswählen
dmesg
wäre noch interessant!!!
Benutzeravatar
naicheben
Professional
 
Beiträge: 3519
Registriert: 07.09.2005 15:28
Wohnort: Leck Nordfriesland

Re: MMS nix geht

Beitragvon daice » 18.04.2011 16:46

also ls/dev/dvb bringt:
Code: Alles auswählen
adapter0


lspci:
Code: Alles auswählen
Zenega101SCI:~# lspci
00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 04)
00:02.0 VGA compatible controller: Intel Corporation 82830 CGC [Chipset Graphics Controller] (rev 04)
00:02.1 Display controller: Intel Corporation 82830 CGC [Chipset Graphics Controller]
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 82)
00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02)
01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
01:07.0 Network controller: Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04)
01:09.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
01:09.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)


dmesg:
Code: Alles auswählen
system 00:07: ioport range 0x400-0x47f has been reserved
system 00:07: ioport range 0x500-0x53f has been reserved
system 00:09: iomem range 0xffc00000-0xfff7ffff has been reserved
system 00:0a: iomem range 0x0-0x0 could not be reserved
system 00:0a: iomem range 0x0-0x0 could not be reserved
system 00:0d: ioport range 0xa00-0xa3f has been reserved
system 00:0e: iomem range 0x0-0x9ffff could not be reserved
system 00:0e: iomem range 0xc0000-0xdffff could not be reserved
system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
system 00:0e: iomem range 0x100000-0x3efffff could not be reserved
system 00:0e: iomem range 0x0-0x0 could not be reserved
PCI: Bridge: 0000:00:1e.0
  IO window: d000-dfff
  MEM window: ff700000-ff7fffff
  PREFETCH window: dea00000-deafffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
it is
Freeing initrd memory: 4758k freed
audit: initializing netlink socket (disabled)
audit(1303136328.600:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 248k freed
ACPI: Processor [CPU1] (supports 8 throttling states)
input: AT Translated Set 2 keyboard as /class/input/input0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 7, io base 0x0000e000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 5, io base 0x0000e080
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 9, io base 0x0000e400
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 10, io mem 0xffa7f400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:01:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp 0000:01:06.0: Try the "8139too" driver instead.
ICH4: IDE controller (0x8086:0x24cb rev 0x02) at  PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
8139too Fast Ethernet driver 0.9.28
hda: SAMSUNG SP1203N, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: host side 80-wire cable detection failed, limiting max speed to UDMA33
hda: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
eth0: RealTek RTL8139 at 0xd800, 00:02:ff:00:23:79, IRQ 11
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
SCSI subsystem initialized
libata version 3.00 loaded.
hda: max request size: 512KiB
hda: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=16383/255/63
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
Attempting manual resume
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Linux agpgart interface v0.102
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Real Time Clock Driver v1.12ac
agpgart: Detected an Intel 830M Chipset.
agpgart: Detected 380K stolen memory.
agpgart: AGP aperture is 128M @ 0xf0000000
input: PC Speaker as /class/input/input1
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
intel_rng: FWH not detected
ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
input: PS/2 Generic Mouse as /class/input/input4
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 52599 usecs
intel8x0: clocking to 48000
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]>
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
ipw2100: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
Linux video capture interface: v2.00
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
bttv0: Bt878 (rev 17) at 0000:01:09.0, irq: 5, latency: 64, mmio: 0xdeafe000
bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is 1822:0001
bttv0: using: Twinhan DST + clones [card=113,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00f500fe [init]
bttv0: tuner absent
bttv0: add subdevice "dvb0"
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:01:09.1[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
bt878_probe: card id=[0x11822],[ Twinhan VisionPlus DVB ] has DVB functions.
bt878(0): Bt878 (rev 17) at 01:09.1, irq: 5, latency: 64, memory: 0xdeaff000
DVB: registering new adapter (bttv0)
dst(0) dst_get_device_id: Recognise [DST-03T]
dst(0) dst_check_stv0299: Found a STV0299 NIM
dst(0) dst_check_mb86a15: Found a MB86A15 NIM
dst(0) dst_get_device_id: [DST-03T] has a [MB 86A15]
dst(0) dst_get_device_id: [DST-03T] has a [MB 86A15]
DST type flags : 0x2 ts204 0x4 symdiv 0x10 firmware version = 2
dst(0) dst_get_mac: MAC Address=[00:08:ca:13:10:00]
DVB: registering frontend 0 (DST DVB-S)...
Adding 417680k swap on /dev/hda2.  Priority:-1 extents:1 across:417680k
EXT3 FS on hda3, internal journal
loop: module loaded
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [email protected]
fuse init (API version 7.9)
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ieee80211_crypt: registered algorithm 'WEP'
eth0: link down
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth1: no IPv6 routers present


Also nach meiner Auffassung läuft die Karte jetzt oder?
Wenn ich VDR Starte kommt erstmal "No Signal" und springt dann zurück ins MMS.
Dann starte ich VDR erneut und Bild war kurz da, allerdings nur Standbild, erneuter Sprung zurück in MMS.
Nach dem dritten Start bleibt VDR an aber es sind mehr Standbilder als TV schaun. Was könnte das sein?
Ach nach gewisser Zeit wieder Rücksprung in MMS...

Gruss daice
Zenega 101s CI mit deb10ega - 120GB HDD - 256MB RAM - WLAN - Budget DVB-S-Karte - GLCD2USB Display
Zenega 101s CI mit deb10ega - 120GB HDD - 256MB RAM - WLAN - Budget DVB-S-Karte - internes DVD-ROM - GLCD2USB Display
Zenega 101s CI mit deb10ega - 120GB HDD - 128MB RAM - WLAN - FullFeatured DVB-S-Karte
S100 mit deb10ega - 16GB CF - 128MB RAM - WLAN - FullFeatured DVB-S-Karte
daice
Advanced Member
 
Beiträge: 51
Registriert: 03.03.2011 19:45

VorherigeNächste

Zurück zu Software

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 1 Gast