Zenega-User

von **sschnake** » 06.02.2010 11:12

Hallo zusammen.
Leider habe ich auch mit der Suche keine Xorg.conf gefunden mit der ich beim DebvisionCR3 Releasecandidate 1 den VGA Ausgang mit 1024x768 einstellen kann.
Kann mich da jemand unterstüzen.

Grüße Stefan

von **naicheben** » 06.02.2010 21:54

ist zwar für cr2, aber das sollte auch gehen:

Code: Alles auswählen: # /etc/X11/xorg.conf (xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the /etc/X11/xorg.conf manual page. # (Type "man /etc/X11/xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "ServerLayout" Identifier "Multihead Layout" # Screen 0 "Bildschirm 0" 0 0 # Screen 1 "Bildschirm 1" Screen 1 "Bildschirm 1" 0 0 InputDevice "Generic Keyboard" InputDevice "Configured Mouse" InputDevice "Joystick" EndSection Section "Files" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/X11R6/lib/X11/fonts/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/X11R6/lib/X11/fonts/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/usr/X11R6/lib/X11/fonts/75dpi" # path to defoma fonts FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" EndSection Section "Module" # Load "GLcore" Load "bitmap" Load "dbe" Load "ddc" Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "record" Load "speedo" Load "type1" Load "vbe" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "de" Option "XkbVariant" "nodeadkeys" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" #Option "Emulate3Buttons" "true" EndSection Section "InputDevice" Identifier "Joystick" Driver "joystick" Option "Device" "/dev/input/js0" Option "SendCoreEvents" "true" Option "MapAxis1" "mode=relative axis=+1.5X deadzone=30" #Stick 1 Option "MapAxis1" "mode=relative axis=+1.5X deadzone=30" Option "MapAxis2" "mode=relative axis=+1.5Y deadzone=30" #Stick 2 Option "MapAxis3" "mode=absolute axis=400Y deadzone=30" Option "MapAxis4" "mode=absolute axis=400X deadzone=30" #Kleines Dings Option "MapAxis5" "mode=accelerated axis=+1ZX deadzone=30" Option "MapAxis6" "mode=accelerated axis=+1ZY deadzone=30" ## Buttons! ## Button 7 Option "MapButton7" "button=1" #left click ## Button 8 Option "MapButton8" "button=3" #middle click EndSection Section "ServerFlags" Option "IgnoreABI" "true" EndSection Section "Device" Identifier "Onboard Intel 0" Driver "intel" VendorName "Intel(R) DEG" BoardName "Embedded Graphics" BusID "0:2:0" VideoRam 32768 #VideoRam 65536 Screen 0 Option "PcfVersion" "1024" Option "XVideo" "0" Option "pd/fs454" "1" Option "Config/0/Comment" "TV Settings" Option "Config/0/name" "My TV" Option "Config/0/General/DisplayConfig" "2" Option "Config/0/General/PortOrder" "25" Option "Config/0/General/CloneWidth" "800" # Option "Config/0/General/CloneHeight" "600" Option "Config/0/General/CloneHeight" "480" Option "Config/0/General/CloneRefresh" "60" Option "Config/0/Port/2/name" "TV" Option "Config/0/Port/2/General/Rotation" "0" Option "Config/0/Port/2/General/Edid" "0" Option "Config/0/Port/2/General/EdidAvail" "0" Option "Config/0/Port/2/General/EdidNotAvail" "0" Option "Config/0/Port/2/General/MultiDvo" "0" Option "Config/0/Port/2/Attr/0" "47" # Screen Brightness (0-100) Option "Config/0/Port/2/Attr/1" "55" # Color Contrast (0-100) Option "Config/0/Port/2/Attr/3" "1000" # Flicker Filter (0-1000, default is 1000) Option "Config/0/Port/2/Attr/4" "40" #"8" # Horizontal Position (0-100) Option "Config/0/Port/2/Attr/5" "20" #"19" # Vertikal Position (0-100) Option "Config/0/Port/2/Attr/7" "530" # Hoehe # Vertikal Scale (0,1000, increment by 10) Option "Config/0/Port/2/Attr/6" "630" # Breite# Horizontal Scale (0,1000, increment by 10) Option "Config/0/Port/2/Attr/8" "3" # TV Format (1=NTSC, 2=NTSC-EIAJ, 3=PAL, 4=PAL-D, 5=PAL-G, 6=PAL-H, 7=PAL-I, 8=PAL-M, 9=PAL-N, 10=PAL-NC, 11=PAL-60, 12=480P, 13=720P) Option "Config/0/Port/2/Attr/10" "0" # Luma Filter (0=Disabled, 1=Enabled) Option "Config/0/Port/2/Attr/11" "0" # Chroma Filter (0=Disabled, 1=Enabled) Option "Config/0/Port/2/Attr/13" "0" # Video Copy Protection Option "Config/0/Port/2/Attr/14" "1" # TV Output Format (1=CVBS, 2=CVBS+Y/C, 3=Y/C, 4=YPrPb, 5=SCART-RGB, 6=VGA-DAC (Note: TV Output Types are limited to svideo and compostie for the VBIOS) Option "Config/0/Port/2/Attr/15" "15" # Color Saturation (0-100, Default is 50) Option "Config/0/Port/2/Attr/30" "0" # Reverses the data order coming out of the DVO port (0=Normal DVO data order, 1=Reverse the DVO RGB data order (0=Default)) Option "Config/0/Port/2/Attr/31" "0" # Image Sharpness (0-1000, default is 800) Option "Config/0/Port/2/Attr/32" "0" # Hardware Configuration for select the FS453/FS454 port drivers (0=Standard configuration, 1=FS454 ADD card, 2=ADD card (Japan J connector), 3=Standard configuration (invert clock) (Default is 3 for the FS454)) Option "Config/0/Port/2/Attr/33" "50" # Horizontal Filter (0-100, default is 50) EndSection Section "Monitor" Identifier "TV Bildschirm" Option "DPMS" HorizSync 28-38 VertRefresh 43-72 EndSection Section "Screen" Identifier "Bildschirm 0" Device "Onboard Intel 0" Monitor "TV Bildschirm" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1280x1024" "1280x768" "1024x768" "1024x576" "800x600" "800x480" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "800x600" "640x480" EndSubSection EndSection Section "Device" Identifier "Onboard Intel 1" Driver "i810" #Screen 1 BusID "PCI:0:2:0" VideoRam 32768 Option "UseFBDev" "true" EndSection Section "Monitor" Identifier "TFT Bildschirm" Option "DPMS" HorizSync 28-64 VertRefresh 43-60 EndSection Section "Screen" Identifier "Bildschirm 1" Device "Onboard Intel 1" Monitor "TFT Bildschirm" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1280x1024" "1280x768" "1280x720" "1024x768" "1024x720" "1024x576" "800x600" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Mode 0666 EndSection

von **sschnake** » 07.02.2010 12:16

Hallo

Leider startet X so nicht

cat /var/log/xorg.......

Code: Alles auswählen: ABI class: X.Org Server Extension, version 0.3 (II) Loading extension RECORD (II) LoadModule: "type1" (WW) Warning, couldn't open module type1 (II) UnloadModule: "type1" (EE) Failed to load module "type1" (module does not exist, 0) (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules//libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.1.0 ABI class: X.Org Video Driver, version 2.0 (II) LoadModule: "i810" (II) Loading /usr/lib/xorg/modules/drivers//i810_drv.so (EE) LoadModule: Module i810 does not have a i810ModuleData data object. (II) UnloadModule: "i810" (II) Unloading /usr/lib/xorg/modules/drivers//i810_drv.so (EE) Failed to load module "i810" (invalid module, 0) (II) LoadModule: "kbd" (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.3.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0 (II) LoadModule: "mouse" (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.3.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0 (II) LoadModule: "joystick" (WW) Warning, couldn't open module joystick (II) UnloadModule: "joystick" (EE) Failed to load module "joystick" (module does not exist, 0) (EE) No drivers available. Fatal server error: no screens found

von **sschnake** » 07.02.2010 13:23

So damit geht es nun

Code: Alles auswählen: lennybox:~# cat /etc/X11/xorg.conf # /etc/X11/xorg.conf (xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the /etc/X11/xorg.conf manual page. # (Type "man /etc/X11/xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "ServerLayout" Identifier "Multihead Layout" # Screen 0 "Bildschirm 0" 0 0 # Screen 1 "Bildschirm 1" Screen 1 "Bildschirm 1" 0 0 InputDevice "Generic Keyboard" InputDevice "Configured Mouse" EndSection Section "Files" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/X11R6/lib/X11/fonts/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/X11R6/lib/X11/fonts/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/usr/X11R6/lib/X11/fonts/75dpi" # path to defoma fonts FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" EndSection Section "Module" # Load "GLcore" Load "bitmap" Load "dbe" Load "ddc" Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "record" Load "speedo" # Load "type1" Load "vbe" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "de" Option "XkbVariant" "nodeadkeys" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" #Option "Emulate3Buttons" "true" EndSection Section "ServerFlags" Option "IgnoreABI" "true" EndSection Section "Device" Identifier "Onboard Intel 0" Driver "intel" VendorName "Intel(R) DEG" BoardName "Embedded Graphics" BusID "0:2:0" VideoRam 32768 #VideoRam 65536 Screen 0 Option "PcfVersion" "1024" Option "XVideo" "0" Option "pd/fs454" "1" Option "Config/0/Comment" "TV Settings" Option "Config/0/name" "My TV" Option "Config/0/General/DisplayConfig" "2" Option "Config/0/General/PortOrder" "25" Option "Config/0/General/CloneWidth" "800" # Option "Config/0/General/CloneHeight" "600" Option "Config/0/General/CloneHeight" "480" Option "Config/0/General/CloneRefresh" "60" Option "Config/0/Port/2/name" "TV" Option "Config/0/Port/2/General/Rotation" "0" Option "Config/0/Port/2/General/Edid" "0" Option "Config/0/Port/2/General/EdidAvail" "0" Option "Config/0/Port/2/General/EdidNotAvail" "0" Option "Config/0/Port/2/General/MultiDvo" "0" Option "Config/0/Port/2/Attr/0" "47" # Screen Brightness (0-100) Option "Config/0/Port/2/Attr/1" "55" # Color Contrast (0-100) Option "Config/0/Port/2/Attr/3" "1000" # Flicker Filter (0-1000, default is 1000) Option "Config/0/Port/2/Attr/4" "40" #"8" # Horizontal Position (0-100) Option "Config/0/Port/2/Attr/5" "20" #"19" # Vertikal Position (0-100) Option "Config/0/Port/2/Attr/7" "530" # Hoehe # Vertikal Scale (0,1000, increment by 10) Option "Config/0/Port/2/Attr/6" "630" # Breite# Horizontal Scale (0,1000, increment by 10) Option "Config/0/Port/2/Attr/8" "3" # TV Format (1=NTSC, 2=NTSC-EIAJ, 3=PAL, 4=PAL-D, 5=PAL-G, 6=PAL-H, 7=PAL-I, 8=PAL-M, 9=PAL-N, 10=PAL-NC, 11=PAL-60, 12=480P, 13=720P) Option "Config/0/Port/2/Attr/10" "0" # Luma Filter (0=Disabled, 1=Enabled) Option "Config/0/Port/2/Attr/11" "0" # Chroma Filter (0=Disabled, 1=Enabled) Option "Config/0/Port/2/Attr/13" "0" # Video Copy Protection Option "Config/0/Port/2/Attr/14" "1" # TV Output Format (1=CVBS, 2=CVBS+Y/C, 3=Y/C, 4=YPrPb, 5=SCART-RGB, 6=VGA-DAC (Note: TV Output Types are limited to svideo and compostie for the VBIOS) Option "Config/0/Port/2/Attr/15" "15" # Color Saturation (0-100, Default is 50) Option "Config/0/Port/2/Attr/30" "0" # Reverses the data order coming out of the DVO port (0=Normal DVO data order, 1=Reverse the DVO RGB data order (0=Default)) Option "Config/0/Port/2/Attr/31" "0" # Image Sharpness (0-1000, default is 800) Option "Config/0/Port/2/Attr/32" "0" # Hardware Configuration for select the FS453/FS454 port drivers (0=Standard configuration, 1=FS454 ADD card, 2=ADD card (Japan J connector), 3=Standard configuration (invert clock) (Default is 3 for the FS454)) Option "Config/0/Port/2/Attr/33" "50" # Horizontal Filter (0-100, default is 50) EndSection Section "Monitor" Identifier "TV Bildschirm" Option "DPMS" HorizSync 28-38 VertRefresh 43-72 EndSection Section "Screen" Identifier "Bildschirm 0" Device "Onboard Intel 0" Monitor "TV Bildschirm" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1280x1024" "1280x768" "1024x768" "1024x576" "800x600" "800x480" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "800x600" "640x480" EndSubSection EndSection Section "Device" Identifier "Onboard Intel 1" Driver "intel" #Screen 1 BusID "PCI:0:2:0" VideoRam 32768 Option "UseFBDev" "true" EndSection Section "Monitor" Identifier "TFT Bildschirm" Option "DPMS" HorizSync 28-64 VertRefresh 43-60 EndSection Section "Screen" Identifier "Bildschirm 1" Device "Onboard Intel 1" Monitor "TFT Bildschirm" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1280x1024" "1280x768" "1280x720" "1024x768" "1024x720" "1024x576" "800x600" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Mode 0666 EndSection

von **naicheben** » 07.02.2010 13:57

Läuft MPEG2 gucken flüssig damit bei 1024x768 bei Dir?

von **sschnake** » 07.02.2010 16:13

Im monent stellt er sich auf 1280 ein. Wo kann ich den einstellen das er nur 1024 nimmt?

von **naicheben** » 08.02.2010 10:38

Du hast ja auch gar keine Modes mehr für Deinen VGA drin!
In /etc/mms/Config musst Du auch die Auflösung auf 1024x768 einstellen. (h_res, v_res)

Eine korrekte Modeline kannst Du auch mit "gft 1024 768 60" erstellen. Um damit aber auch einen gültigen Eintrag hinzubekommen, musst Du die korrekt in die xorg.conf eintragen. Einfach reinkopieren langt nicht. Schau mal "man xorg.conf", da wird das erklärt.

von **sschnake** » 08.02.2010 17:30

So.
Ich hab jetzt alles auf 1024x768. Ist zwar wie Perlen vor die Säue mit dem Monitor, aber alles läuft super.

http://twitpic.com/11vj8a http://twitpic.com/11wuha

Vielen dank nochmal für die Hilfe.
Das nächste Projekt wird nun eine S100 als Newsreader / NAS und eine als XP system. Dann hab ich leider auch keine mehr ;-)

von **naicheben** » 08.02.2010 17:35

Könntest Du dann bitte Deine xorg.conf für Interessierte hier hochladen?
Danke.

von **sschnake** » 08.02.2010 17:52

Türlich. Hatte uch nur vergessen ;-)

Code: Alles auswählen: lennybox:~# cat /etc/X11/xorg.conf # /etc/X11/xorg.conf (xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the /etc/X11/xorg.conf manual page. # (Type "man /etc/X11/xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "ServerLayout" Identifier "Multihead Layout" # Screen 0 "Bildschirm 0" 0 0 # Screen 1 "Bildschirm 1" Screen 1 "Bildschirm 1" 0 0 InputDevice "Generic Keyboard" InputDevice "Configured Mouse" EndSection Section "Files" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/X11R6/lib/X11/fonts/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/X11R6/lib/X11/fonts/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/usr/X11R6/lib/X11/fonts/75dpi" # path to defoma fonts FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" EndSection Section "Module" # Load "GLcore" Load "bitmap" Load "dbe" Load "ddc" Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "record" Load "speedo" # Load "type1" Load "vbe" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "de" Option "XkbVariant" "nodeadkeys" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" #Option "Emulate3Buttons" "true" EndSection Section "ServerFlags" Option "IgnoreABI" "true" EndSection Section "Device" Identifier "Onboard Intel 0" Driver "intel" VendorName "Intel(R) DEG" BoardName "Embedded Graphics" BusID "0:2:0" VideoRam 32768 #VideoRam 65536 Screen 0 Option "PcfVersion" "1024" Option "XVideo" "0" Option "pd/fs454" "1" Option "Config/0/Comment" "TV Settings" Option "Config/0/name" "My TV" Option "Config/0/General/DisplayConfig" "2" Option "Config/0/General/PortOrder" "25" Option "Config/0/General/CloneWidth" "800" # Option "Config/0/General/CloneHeight" "600" Option "Config/0/General/CloneHeight" "480" Option "Config/0/General/CloneRefresh" "60" Option "Config/0/Port/2/name" "TV" Option "Config/0/Port/2/General/Rotation" "0" Option "Config/0/Port/2/General/Edid" "0" Option "Config/0/Port/2/General/EdidAvail" "0" Option "Config/0/Port/2/General/EdidNotAvail" "0" Option "Config/0/Port/2/General/MultiDvo" "0" Option "Config/0/Port/2/Attr/0" "47" # Screen Brightness (0-100) Option "Config/0/Port/2/Attr/1" "55" # Color Contrast (0-100) Option "Config/0/Port/2/Attr/3" "1000" # Flicker Filter (0-1000, default is 1000) Option "Config/0/Port/2/Attr/4" "40" #"8" # Horizontal Position (0-100) Option "Config/0/Port/2/Attr/5" "20" #"19" # Vertikal Position (0-100) Option "Config/0/Port/2/Attr/7" "530" # Hoehe # Vertikal Scale (0,1000, increment by 10) Option "Config/0/Port/2/Attr/6" "630" # Breite# Horizontal Scale (0,1000, increment by 10) Option "Config/0/Port/2/Attr/8" "3" # TV Format (1=NTSC, 2=NTSC-EIAJ, 3=PAL, 4=PAL-D, 5=PAL-G, 6=PAL-H, 7=PAL-I, 8=PAL-M, 9=PAL-N, 10=PAL-NC, 11=PAL-60, 12=480P, 13=720P) Option "Config/0/Port/2/Attr/10" "0" # Luma Filter (0=Disabled, 1=Enabled) Option "Config/0/Port/2/Attr/11" "0" # Chroma Filter (0=Disabled, 1=Enabled) Option "Config/0/Port/2/Attr/13" "0" # Video Copy Protection Option "Config/0/Port/2/Attr/14" "1" # TV Output Format (1=CVBS, 2=CVBS+Y/C, 3=Y/C, 4=YPrPb, 5=SCART-RGB, 6=VGA-DAC (Note: TV Output Types are limited to svideo and compostie for the VBIOS) Option "Config/0/Port/2/Attr/15" "15" # Color Saturation (0-100, Default is 50) Option "Config/0/Port/2/Attr/30" "0" # Reverses the data order coming out of the DVO port (0=Normal DVO data order, 1=Reverse the DVO RGB data order (0=Default)) Option "Config/0/Port/2/Attr/31" "0" # Image Sharpness (0-1000, default is 800) Option "Config/0/Port/2/Attr/32" "0" # Hardware Configuration for select the FS453/FS454 port drivers (0=Standard configuration, 1=FS454 ADD card, 2=ADD card (Japan J connector), 3=Standard configuration (invert clock) (Default is 3 for the FS454)) Option "Config/0/Port/2/Attr/33" "50" # Horizontal Filter (0-100, default is 50) EndSection Section "Monitor" Identifier "TV Bildschirm" Option "DPMS" HorizSync 28-38 VertRefresh 43-72 EndSection Section "Screen" Identifier "Bildschirm 0" Device "Onboard Intel 0" Monitor "TV Bildschirm" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1280x1024" "1280x768" "1024x768" "1024x576" "800x600" "800x480" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "800x600" "640x480" EndSubSection EndSection Section "Device" Identifier "Onboard Intel 1" Driver "intel" #Screen 1 BusID "PCI:0:2:0" VideoRam 32768 Option "UseFBDev" "true" EndSection Section "Monitor" Identifier "TFT Bildschirm" Option "DPMS" HorizSync 28-64 VertRefresh 43-60 EndSection Section "Screen" Identifier "Bildschirm 1" Device "Onboard Intel 1" Monitor "TFT Bildschirm" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1024x768" "1024x720" "1024x576" "800x600" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Mode 0666 EndSection lennybox:~#

Diese Einstellungen funktionieren bei mir 100%ig.

Wobei ich ja doch versucht bin es nochmal mit 1280 zu versuchen. Mal schauen.

Zenega-User

DebvisionCR3 Releasecandidate 1 VGA

DebvisionCR3 Releasecandidate 1 VGA

Re: DebvisionCR3 Releasecandidate 1 VGA

Re: DebvisionCR3 Releasecandidate 1 VGA

Re: DebvisionCR3 Releasecandidate 1 VGA

Re: DebvisionCR3 Releasecandidate 1 VGA

Re: DebvisionCR3 Releasecandidate 1 VGA

Re: DebvisionCR3 Releasecandidate 1 VGA

Re: DebvisionCR3 Releasecandidate 1 VGA

Re: DebvisionCR3 Releasecandidate 1 VGA

Re: DebvisionCR3 Releasecandidate 1 VGA

Wer ist online?